Tips for How to Use a Twin Needle - VIDEO TUTORIAL

View fullsize

One of the best ways to finish off your knit projects is to use a twin needle to stitch the hem. The great thing about a twin needle is that it can be used on any conventional sewing machine (as long as the needle plate can accommodate the width of the two needles) but sometimes it can be challenging to use.

In today’s video, I’ll give you some tips that you can use to trouble shoot your twin needle stitching.

1) Use wooly nylon thread

2) Use wash away adhesive sewing tape

3) Adjust the bobbin tension (I’m a little reluctant to recommend this and have never actually done it so PROCEED WITH CAUTION. I suspect it could work because a lot of the issues around twin needles is that the bobbin thread is too tight. But, it could be challenging to change the tension back. So, research it. On my Brother CS6000i, the only way to get it to work with elastic thread in the bobbin is to adjust the bobbin tension and it was recommended to buy a second bobbin case expressly for that purpose.)

4) If your machine has it, use the twin needle setting. (I’m using a Janome Memory Craft in this example and it makes a noticeable difference when I use the twin needle setting.)

5) Thread the machine according to your machine’s manual. (And thread each thread separately, not both at the same time.)

6) If you’re still having problems, do a google search for your specific machine. Other people might have posted about it.

I hope that you’ve enjoyed this video. I have a whole series of YouTube videos planned focused on tips and tutorials for sewing with knits. In case you missed it, make sure to check out last week’s video “How to Adjust Serger Tension". And if you haven’t done so already, I’d be so grateful if you subscribe to my channel on YouTube.

How to Adjust Serger Tension - VIDEO TUTORIAL

View fullsize

Let’s face it. Serger tension can be tricky AND it takes a lot of patience. All those threads create beautiful, and dare I say magical, overcast stitches but they also create more opportunities for a tension issue. Each thread has a tension dial that can either be too tight or too loose, meaning you have 8 different options for how to adjust the tension. In today’s YouTube video, I give some tips for adjusting the tension on your machine and show some common tension issues.

If you’re running short on time today, here’s a quick rundown of my top tips for adjusting the tension dials on your serger or overlocker:

1. Test out your tension on a scrap of fabric before you stitch your garment (and make sure to use the same fabric and number of layers that you plan on stitching)

2. Evaluate the stitches and consult your serger manual to identify the possible issue

3. Adjust only one dial at a time. Snap a photo with your phone if you tend to forget what adjustments you’ve been making.

4. Have patience. It’s a process of trial and error and will take a little bit of time to find the best tension settings for your fabric.

I hope that you’ve enjoyed this video. I have a whole series of YouTube videos planned focused on tips and tutorials for sewing with knits. In case you missed it, make sure to check out last week’s video “How to Thread a Serger". And if you haven’t done so already, I’d be so grateful if you subscribe to my channel on YouTube. Happy sewing!

Six Tips for Sewing with Knit Fabrics Video

Today I’m excited to share a new video with my top 6 tips for getting started sewing with knit fabric. When I first wanted to start sewing knits over 10 years ago, I was really intimidated because I didn’t know what to do. Over the years, I’ve done a lot research and had a lot of practice and now I love to sew with knit fabric. I’m planning a whole series of videos about sewing knit fabric so after you watch this one, make sure to subscribe to my channel on YouTube so you won’t miss any future videos. 

Six Tips for Sewing with Knit Fabric

1. Find the straight of grain by holding up the fabric with the selvages of the fabric aligned. Shift the selvages to the left and right until the fabric hangs straight and doesn’t have any drag lines.

2. Use a rotary cutter for better accuracy.

3. Use a stitch with stretch (more on that down below)

4. Use a walking foot or, if you don’t have one stitch with tissue paper under your fabric to help it feed through the machine.

5. Use a ballpoint or jersey needle. This will prevent holes from being made in the fabric during stitching. Bonus tip! Test your stitches and needle on a scrap of fabric.

6. Jump in and practice. Every machine and fabric will behave a little differently so it’s important to practice and figure out which techniques work best for your machine.

I hope you enjoy this video. Let me know in the comments if there are any sewing topics that you’d like me to cover.